Controls Engineer - SRF Linac

Subcritical Systems
Subcritical Systems

Full-time

Austin, TX, USA

Posted on Nov 14, 2026

ROLE SUMMARY

Subcritical Systems Inc. is hiring a Controls Engineer to design, build and support the control systems used to develop, fabricate and test the superconducting RF (SRF) linac for its accelerator-driven subcritical fission energy system. The linac is comparable in class to the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory.

This engineer delivers working controls for the hardware SSI builds now: cavity processing and test stands, cryogenic and vacuum systems, RF conditioning stands and cryomodule test facilities.

KEY RESPONSIBILITIES

Test stand and fabrication controls

  • Design and commission control and data acquisition systems for cavity vertical test stands, coupler conditioning stands, and cryomodule horizontal test facilities.
  • Automate fabrication and processing equipment incorporating stepper/servo motors, position feedback systems, temperature controllers, flow controllers, and vacuum systems.
  • Integrate commercial instruments into larger systems using common industrial communication protocols.
  • Develop operator interfaces, alarm handling and automated test sequences that make test runs repeatable and reduce operator error.

Cryogenic, vacuum and utility controls

  • Program PLC-based controls for helium distribution, cryogenic valves and heaters, vacuum pumping and venting sequences.
  • Implement cooldown, warmup and fault-recovery sequences with the cryogenics team.
  • Interface with vendor-supplied packages such as cryoplants, compressors and vacuum carts over industrial networks.

RF and LLRF integration

  • Support cavity field control, resonance control and piezo/stepper tuner automation with RF engineers.
  • Archive fast and slow RF data for cavity performance analysis and fault diagnosis.

Interlocks and protection

  • Design hardware and PLC-based interlocks for RF, high voltage, cryogenics, vacuum and radiation, including RF permit, quench detection and reflected-power trips.
  • Document interlock logic, perform hazard and failure analyses, and run interlock verification tests before each test campaign.
  • Support the personnel protection and safety systems with the safety team.

Architecture, standards and data

  • Help establish SSI's controls architecture and standards: EPICS (or chosen framework), naming conventions, network layout, timing and version control.
  • Set up data archiving, logging and electronic test records that feed the cavity and cryomodule production database.
  • Write specifications, drawings, wiring diagrams, test procedures and user documentation; support design reviews.
  • Build panels and cabinets with technicians, and troubleshoot hardware and software in the lab and field.

QUALIFICATIONS

Required

  • B.S. in Electrical, Computer or Controls Engineering, Physics, or a related field.
  • 4+ years designing, programming and commissioning industrial or scientific control systems.
  • Hands-on PLC programming (e.g., Allen-Bradley/Rockwell, Siemens or Beckhoff) and HMI/SCADA development.
  • Programming skill in Python and at least one of C/C++, LabVIEW or similar.
  • Experience integrating instruments and devices over common interfaces: EtherNet/IP, Modbus, Profinet, serial, GPIB or LXI.
  • Ability to read and produce electrical schematics and panel wiring drawings.
  • Experience designing safety interlocks and working to safety standards.
  • Comfortable working hands-on in labs, shops and test areas, and troubleshooting hardware and software.

Preferred

  • Experience with EPICS (IOCs, Channel Access/PV Access, CS-Studio/Phoebus, Archiver Appliance) at an accelerator or large physics facility (e.g., ORNL SNS, Jefferson Lab, Fermilab, FRIB, ESS).
  • Experience with SRF test facilities, cryogenic plants or vacuum systems.
  • Familiarity with LLRF systems, FPGA-based controllers or MicroTCA hardware.
  • Experience with machine protection or personnel protection systems.
  • Experience with Linux system administration, containerized deployment and Git-based workflows.
  • Experience building manufacturing data systems or test databases.
  • Familiarity with relevant QA standards